Pressure Amplifiers Series UM ..- 100
Pressure amplifiers (pneumatic boosters) of the UM ..- 100-RS 1/2 series manufactured by PNEVMOLUX maintain the outlet pressure even in the event of a drop in inlet pressure. The casing is made of anodized aluminum. It can be completed with a pressure regulator with a manometer. A pressure regulator is installed at the inlet and controls the supply pressure. The booster automatically increases pressure by 2, 3 or 4 times depending on the model. When selecting a pressure amplifier (pneumatic booster), it should be borne in mind that with increasing pressure, the air flow decreases (see the graph of amplification and flow).
Designation:
UM XX-100- RC 1/2
1 2 3
| 1 | Серия | 10 – стандартный 20 – с регулятором давления |
|---|---|---|
| 2 | Внутренний диаметр, мм | 100 |
| 3 | RC усиление давления | 1.2 – в два раза |
| ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ | |
|---|---|
| Присоеденительная резьба | G 1/2″ |
| Вес ,кг | 9,7 |
| Рабочая среда | Подготовленный воздух |
| Рабочее давление, бар | от 4 до 7 бар |
| Рабочая температура, °С | от –30 до +80 |
Schematic diagram of the pressure amplifier (pneumatic boosters):
Amplification and flow chart:
Outline sketch:
